HF-Kabel & HF-Verbinder
seit
2002
Inh. K. Kusch
Tel.
0231 25 72 41 Fax
0231 25 23 99
E-mail: info@kabel-kusch.de
www.Kabel-kusch.de
Montageanleitung UG 801 TA
STG S = versilbertes Steckergehäuse T = PTFE-Dielektrikum G = vergoldeter Mittelkontakt
TA = Tres Alloy CuSnZn3 (weiße Bronze) + PTFE-Dielektrikum
UG 801 TA besitzt eine nickelfreie Oberfläche (TresAlloy) sowie einen Silikon-O-Ring,
der die Wasserdichtigkeit erhöht. Die begefügten Mittelstifte sind
diamagnetisch.
UG 801 TA is delivered with a surface free of nickel. TA = TresAlloy, that
means white bronze.
UG 801 - TA |
unser Löt-TNC-Stecker |
|
our TNC-plug-solder-connector |
|
PTFE-Dielektrikum, vergoldeter Mittelstift, diamagnetisch |
|
PTFE insulation, gold plated center pin |
TNC-Stecker für |
H 2000 Flex, H 2010, Calorix 10, Ecoflex 10, Ultraflex 10, RG 213 U, RG 214 U, Hyperflex 10, LMR 400 u.a. u.ä. |
TNC-plug suitable for |
H 2000 Flex, H 2010, Calorix 10, Ecoflex 10, Ultraflex 10, RG 213 U, RG 214 U, Hyperflex 10, LMR 400 and similar |
photo Bild 1
photo Bild 2
photo
Bild 3
photo
Bild 4
Die Masseverbindungshülse muss zwischen Folie und Geflecht.
The clamp must be placed between the copper-foil and the braid.
La pièce cylindrique doit être insérrée entre la feuille de cuivre
et la tresse extérieure.
Il collegamento della massa si mette tra li folio di rame e la calza.
photo
Bild 5
photo Bild 6
photo Bild 7
Mithilfe unserer
Koaxkabelschere
KKS 16 wird der Innenleiter immer so
geschnitten, dass die Innenleiterstruktur erhalten bleibt und der
Mittelkontakt
problemlos aufgesteckt werden kann.
Our new coax cable pliers cut the center
conductor
very precisely without changing its inner structure.
Thus you can easily place the center pin onto the cable.
photo
Bild 8
Die Abbildung zeigt den exakt geschnittenen Innenleiter
7x1,0 mm.
Die Struktur des 7adrigen Leiters bleibt beim Schneiden unverändert.
Der Mittelkontakt kann ohne irgendeine Korrektur aufgesteckt werden.
The photo shows the exactly cut of the center
conductor 7 x 1,0 mm.
The structure of the center conductor is not changed.
The center contact of UG 801 TA can be put on without any correction.
photo Bild 9
photo
Bild 10
photo
Bild 11
photo
Bild 12
Vergessen Sie bitte nicht, eine Kurzschlussüberprüfung durchzuführen!
Please, do never forget to check, if there is a short-circuit!
N'oubliez jamais de contrôler, s'il y a un court-circuit dans la fiche!
Non dimenticare di controllare se si trova un corto circuito nella spina!
Händleranfragen für unsere Produkte erwünscht. |
Dealer enquiries wanted. We would like to prepare |
Si vous êtes commerçant(e), nous proposons de vous |
Per i commercianti abbiamo offerte speciali. |