gd-0017.gif.gif img5.gifgd-0017.gif.gif

        HF-Kabel & HF-Verbinder
 Inh. K. Kusch

Tel.    0231 25 72 41      Fax     0231 25 23 99
 E-Mail: info@kabel-kusch.de
 www.Kabel-kusch.de

 

Ecoflex 10  
made in Germany

 

Home

 Koaxkabel
coaxcable		 Stecker
connectors		 Montagen
assemblies		 Zubehör
accessories		 Anfahrt Impressum Datenschutz AGB Kontakt

 


 Ecoflex®10 - flexible and low loss coaxial cable

original data sheet

 


Interested?! Check out our pricelist!

 

Ecoflex 10 is a flexible, low-loss coaxial cable specifically designed for use up to 6 GHz. Advanced manufacturing techniques combined with the use of a low-loss PE-LLC Dielectric yields a foaming rate of more than 70%. This results in very low attenuation. Ecoflex 10 sets standards among flexible coaxial cables.

The flexibility of Ecoflex 10 is further enhanced through the use of a stranded, oxygen-free copper center conductor. Use of proprietary techniques, continuous center conductor calibration and compression as well as the application of a precoating results in low losses and good impedance matching. Further advantages of the cable include the use of double shielding which is constructed of overlapping copperfoil plus an additional tight woven copper braid.

A screening efficiency of > 90 dB @ 1 GHz is realized. The copperfoil has an applied PE-coating which prevents foil cracking due to short radius bends. The black PVC sheath of Ecoflex 10
is UV-stabilized. In addition to a full compliment of standard connectors, an easy to use solder free N-connector has been specially developed for Ecoflex 10. Connector installation only takes a few minutes and requires no special tools.
 
Diameter ............................................              ......... 10,2 mm
Impedance ........................................................        50 Ohm
Attenuation @ 1 GHz/100m............................       14,2 dB
fmax ....................................................    ...........        6 GHz

 


 

available connectors for Ecoflex 10


 

 

Our new coax cable pliers cut the center conductor
very precisely without changing its inner structure.
Thus you can easily place the center pin onto the cable. 

 

 

Technical data
Centre conductor stran. copper, oxygen free, 7 x 1,0 mm
Centre conductor Ø 2,85 mm
Dielectric PE, low-loss Compound
Dielectric Ø 7,25 mm
Outer conductor 1 copperfoil, PE-coated
Shielding factor 100 %
Outer conductor 2 copper braid
optical shielding factor 72 %
Sheath black PVC, UV-resistant
Outer diameter Ø 10,2 mm
Weight 131 g/m
Min. bending radius one single bending .40 mm
15 repeated bendings 80 mm
Temperature range storage  -70 to +85°C
Temperature range installation -40 to +60°C
Temperature range operation -55 to +85°C
Pulling strength 50 N
   

 

Electrical specifications
Electrical specifications 50 Ohm
Capacity 78 pF/m
Velocity factor 0,85
fmax 6 GHz
Screening efficiency @ 1 GHz > 90 dB
DC-resistance:  
   Centre conductor 3,3 Ohm/km
   Outer conductor 8,4 Ohm/km
RF peak voltage 1kV
   

 

Attenuation (dB/100 m)Attenuation (dB/100 m 20°C)
5 MHz 0,8 dB
10 MHz 1,2 dB
50 MHz 2,8 dB
100 MHz 4,0 dB
144 MHz 4,9 dB
200 MHz 5,8 dB
300 MHz 7,3 dB
432 MHz 8,9 dB
500 MHz 9,6 dB
1000 MHz 14,2 dB
1296 MHz 16,5 dB
1500 MHz 17,9 dB
1800 MHz 19,9 dB
2000 MHz 21,2 dB
2400 MHz 23,6 dB
3000 MHz 27,9 dB
4000 MHz 32,2 dB
5000 MHz 37,2 dB
6000 MHz 41,5 dB

 

 

Max. power handling (W @ 40°C)
     10 MHz 3960 Watt
   100 MHz 1210 Watt
   500 MHz 510 Watt
 1000 MHz 350 Watt
 2000 MHz 230 Watt
 3000 MHz 180 Watt
 4000 MHz 150 Watt
 5000 MHz 130 Watt
 6000 MHz 120 Watt

Informations: SSB-Electronic

 

Händleranfragen für unsere Produkte erwünscht.
Wir erstellen Ihnen gern individuelle Angebote.

Dealer enquiries wanted. We would like to prepare
individual quotations for you.

Si vous êtes commerçant(e), nous proposons de vous
soumettre une offerte individuelle.

Per i commercianti abbiamo offerte speciali.